Bird Technologies 5015 Series-Manual - Manual (Page 15)

3
Chapter 2 Installation
Connecting Terminating Power Sensor (TPS)
Note:
Connections are the same for the
Bird 5011 and 5011-EF.
CAUTION
Discharge all static potentials before connecting the
TPS(-EF). Electrostatic shock could damage the sensor.
CAUTION
When connecting the TPS or the TPS-EF, only turn
the connector nut. Damage may occur if torque is
applied to the sensor body.
CAUTION
Do not exceed 2 W average or 125 W peak power for 5
µs when using the TPS or the TPS-EF. Doing so will
render the sensor inoperative.