Bendix Commercial Vehicle Systems BLINDSPOTTER INSTALLATION GUIDE - Manual (Page 13)

11
Installation Procedure
Side Object Display Mounting
The Bendix ™ BlindSpotter ® Side Object Detection Display Unit should be mounted on
the inside of the cab to the windshield pillar. The display unit should be positioned in
line with the side view mirror on the same side of the vehicle as the sensor without
obstructing the driver's view.
The Side Object Display Unit is not weather proof and must be mounted on the
inside of the cab. Failure to observe this warning will result in a void of warranty.
▲
WARNING !
Vehicles with dual left and right side sensors will have a display mounted on both the
left and right windshield pillars.