Adjusting beolink active sound – Bang & Olufsen BeoLink Active - User Guide User Manual

Page 9

Adjusting BeoLink Active sound

The sound in your BeoLink Active setup
is adjusted quite independently from
your main Bang & Olufsen system:

You can, of course, adjust volume any
time by pressing

∧

∨

on the Beo4

remote control; or you can press the
volume button right on the middle to
silence the speakers completely.

Each time you press the LIST button on
the Beo4 remote control, a new cue
appears in the display.

When you have found the cue for the
function you want, you must press the
GO button to switch on (activate) the
function.

Pressing LIST enables you to access the
cue A.SETUP*. When you press GO and
LIST again, you may now adjust the
sound coming out of the speakers in
your BeoLink Active setup by means of
the cues BASS, TREBLE and LOUDNESS.

Then use the step buttons

▲ or ▼, GO,

and

ss or tt to adjust as required.

See how to the right on this page...

All the sound levels will be reset to
their original settings when you switch
off the BeoLink Active.

However, all you have to do to turn
your adjustment into a permanent
setting of your BeoLink Active setup is
press LIST to display A.SETUP* then GO.
Press LIST again to display S.STORE then
GO.

Please note…
• All the current sound levels (volume, balance,

bass, treble and loudness) will be stored
simultaneously.

• If you wish to adjust sound levels for video

sources, you must display V.SETUP* on Beo4
instead of A.SETUP*.

• Pressing LIST to display RESET* and then GO

resets your sound adjustment – if it hasn’t been
stored.

*Note: In order to display A.SETUP, V.SETUP,
SPEAKER

, and RESET on Beo4, you must add the

functions to Beo4. See Beo4’s own User’s guide
and the chapter, Customising your Beo4, for
further instruction.

Raises the volume

Lowers the volume

Press right on the middle to silence
the speakers immediately
Press again to recall the sound

Press to display SPEAKER*

Adjusts balance to the left

Adjusts balance to the right

Press to display A.SETUP*

Press to display BASS

More bass

Less bass

Press to display TREBLE

More treble

Less treble

Press to display LOUDNSS

Sets loudness on/off

Adjust the various sound levels to
your liking, then...

Press to display A.SETUP*

Press to display S.STORE
Press to store your new sound levels
as a permanent setting of your
BeoLink Active speakers

LIST

then

LIST

then

LIST