beautypg.com

Close-up operation, Sound control, Timer play control – Bang & Olufsen BeoLink Active - User Guide User Manual

Page 5: Volume adjustment, Sound control timer play control

background image

C L O S E - U P O P E R A T I O N

5

Sound control

Timer Play control

If you have programmed your main
Bang & Olufsen system to start playing
automatically (Timer Play) – for
example to wake you up in the
morning – the speakers in your BeoLink
Active room can be included as well.

To do so, just press the TIMER key on
the BeoLink Active receiver. A small red
light in the TIMER key indicates that
your BeoLink Active room will be
included as well, whenever your main
system starts playing a Timer Play
programming.

Press TIMER again to cut out the Timer
function (the red light disappears).

Volume adjustment

Volume is adjusted quite indepen-
dently of your main Bang & Olufsen
system.

By pressing the volume buttons

or

on the BeoLink Active receiver, you can
raise or lower the volume level in the
loudspeakers as you like.

Note: See page 9 for further information about
sound.

Note: If your main Bang & Olufsen system is in
stand-by when you switch on the BeoLink Active,
you will only get sound in the speakers in your
BeoLink Active room – the loudspeakers in your
main system will not be cut in.

The lower key marked PLAY • on the
BeoLink Active receiver enables you to
listen-in on a source that is currently
playing in your main Bang & Olufsen
system.

If no source is playing, pressing PLAY •
will switch on the radio* program that
was last playing.

No matter how, whenever you press
PLAY •, the sound from your main
system will be heard instantaneously in
your BeoLink Active room.

Press PLAY • again briefly, and the
BeoLink Active switches off – a small,
red light (stand-by indicator) appears in
the PLAY • key.

If you keep your finger on PLAY • for
two seconds, both the BeoLink Active
and your main system will switch off
simultaneously.

* Note: If your main system consists of a Bang &

Olufsen video system only (with no audio
sources), pressing PLAY • will switch on the TV
program that was last playing.

The small circular BeoLink Active receiver has

three keys for close-up operation...