Bang & Olufsen BeoLink Active - User Guide - Manual (Page 10)

Using the Beolink 1000
remote control
10
The Bang & Olufsen Beolink 1000
remote control may also be used to
operate the BeoLink Active.
For detailed information about Beolink
1000 operation, please refer to the
Beolink 1000 User’s guide.
In order to adjust sound in your
BeoLink Active setup, you must use the
SOUND button on the Beolink 1000
remote control:
• Press SOUND once to adjust balance
• Press SOUND twice to adjust bass
• Press SOUND three times to adjust
treble
• Press SOUND four times to adjust
loudness
Note: For the actual adjusting, you must use the
<<
or
>>
buttons to adjust balance and the ▲ and
▼ buttons to adjust bass, treble, and loudness.
>Remote operation
Audio sources...
Switches on the radio
Starts the CD player
Starts the tape recorder
To “turn” the tape to play the other
side, press SHIFT then SOUND
Video sources...
Switches on the TV
Switches on to satellite TV
Starts the video tape recorder
Press to step through your programs;
or to step from track to track on a
CD or a tape
Alternatively, key in the exact
program or track number you want
Press to pause your CD player, or
your audio or video tape recorder
(Press STOP twice to stop the VTR
completely before winding)
Rewinds a tape; searches backwards
on a CD
Fast forwards a tape; searches
forwards on a CD
Press to resume playing
Press briefly to switch off the
BeoLink Active
RADIO
CD
A. TAPE
TV
SAT
V. TAPE
0
9
STOP
PLAY
●
through
or
or