Bang & Olufsen BeoSound 4 - User Guide - Manual (Page 23)

Mains connection –
~
Plug the mains cord into the socket marked ~ on
the socket panel, but do not connect it to the
mains before you have fi nished all connections.
The music system can only be switched off
completely by disconnecting it from the wall
socket. The mains plug of the power supply cord
must remain readily operable.
Loudspeaker connections – Power Link
Connect your active speakers to the sockets
marked Power Link. Refer to the Guides for the
BeoLab Loudspeakers.
Remember to set L • R • LINE switch on the
BeoLab speakers to L and R (left and right),
respectively.
When head phones are plugged in, the speakers,
connected to your music system, are muted.
Prolonged listening at a high volume level may
cause hearing damages!
Master Link connections
Use a Master Link cable to connect the sockets
marked Master Link on the socket panel and the
television.
The socket is also used for BeoLink distribution of
sound throughout the house.
Connect auxiliary equipment …
AUX IN L – R
For connection of auxiliary equipment, such as a
record player.
AUX OUT L – R
For connection of auxiliary equipment, such as a
mini disc.
25