Bang & Olufsen BeoSound 4 - User Guide - Manual (Page 15)

Make sound settings
All sound levels are set to neutral
values from the factory, but you can
make your own sound adjustments
and store them.
If speakers are connected directly to
your music system, you can adjust
the volume, bass and treble levels, or
alter the balance between the left
and right speaker.
If you store a volume level, your
music system starts playing at this
level every time you switch it on.
The music system also features a
loudness function which you can
activate or deactivate. The loudness
function makes the music more
dynamic. It compensates for the
human ear’s lack of sensitivity to high
and low frequencies when listening
to music at low volume.
What’s on the SOUND menu …
VOLUME … Use this menu to preset a volume
level for your music system. The maxi mum
volume level that can be stored in this menu is
75.
BALANCE … Use this menu to adjust the balance
between your speakers.
SET TONE (BASS, TREBLE, LOUDNESS) … Use
this menu to adjust bass and treble to your
liking and switch the loudness feature on or off.
Useful hints …
If you do not store the sound adjust ments you
make, the music system will return to the preset
sound levels once you switch it off.
Volume level can always be adjusted via the close-
up operation panel or the Beo4 remote control.
17
To enter the SOUND menu, press MENU, enter the
SETUP menu and then enter the SOUND menu.
… SOUND
1 VOLUME
2 BALANCE
3 SET TONE (BASS, TREBLE, LOUDNESS)