Bang & Olufsen BeoLab 7-6 - User Guide - Manual (Page 7)

The position switch
When a loudspeaker is placed in a
corner or close to a wall, the bass
level is boosted compared to the
bass level from a loudspeaker
placed in a more free-standing
position.
To remove this excessive bass boost,
use the position switch to ensure
that the bass level suits the place-
ment of the loudspeaker. The
appropriate switch setting depends
on the distance from the loud-
speaker to the walls and corners of
the room.
The switch has two settings:
F – Free-standing position
Use this setting if the loudspeaker
is placed so that the front grill is
more than 50 cm (20”) from the
rear wall.
W – Wall position
Use this setting if the loudspeaker
is placed so that the front grill is less
than 50 cm (20”) from the rear
wall.
If the loudspeaker is fitted to a low
stand – and you have chosen to
place it on the floor – you should
set the position switch to W.
The position switch is located on
the loud speaker socket panel.
F W
F W
7