Bang & Olufsen BeoLab 4 - User Guide - Manual (Page 5)

Loudspeaker front and side
panels
With each loudspeaker you will get
one front panel and two side panels.
These panels must be fastened to
the loudspeaker before use.
The front panel is marked with a
Bang & Olufsen name plate. Each
of the panels have three small pegs
on the rear.
Fasten the panels by inserting the
three pegs into the corresponding
holes (A–B) in the front and the
sides of the loud speaker.
Note: The product identification
and CE labels are placed on the
loudspeaker body behind the side
panels.
Ceiling Bracket: This optional
accessory has a hidden lock, which
must be released before you can
detach the loud speaker from the
ceiling.
Use a small screw driver, for example,
to push the lock inwards, while
turning the loud speaker counter-
clockwise until it is free.
A
A A
B
B B
2
3
5
1