Bang & Olufsen BeoLab 1 - User Guide - Manual (Page 3)

Contents of the Guide
How to set up the BeoLab 1
loudspeaker
4 Before you start…
NOTE! We urge you to read this part before
you start assembling your loudspeakers.
Assemble the column and base
plate
5 Assembly
5 Rubber Feet – adjustment
Connect your loudspeakers
6 …to a Bang & Olufsen product
7 …to a non-Bang & Olufsen product
7 …to the mains
7 Running the cables – cable cover,
cable clamps
Adapt the BeoLab 1 to its
surroundings
8 Setting the Speaker Position switch
(Bass Alignment)
Daily use
10 Switching on and off – indicator
10 Loudspeaker protection
10 Cleaning the BeoLab 1
The BeoLab 1 loudspeaker is
separated in two boxes: one
containing the loudspeaker column,
and the other the base plate.
This User’s guide describes how to
assemble the BeoLab 1 loudspeaker
column and base plate, how to
connect the BeoLab 1 loudspeaker,
and how to adjust it to your
surroundings. Likewise, the guide
gives some advice on how to place
the BeoLab 1.