About the access control and ca module menus – Bang & Olufsen DVB-S - User Guide User Manual
Page 11
The Access Control menu allows you to lock
specifi c TV or radio programs, or you can set
a Maturity Rating that determines which
programmes or scenes require the entering
of a pincode.
When you enter the TV or Radio Programs
menus, you can lock (and later unlock) programs
in the lists to avoid others from watching or
listening to these programs. Select the
programs you wish to lock. If a program is
present in for example more than one
Favourite List and you lock it in the Programs
list, it will be locked in all lists automatically.
Whenever you wish to access locked programs,
you are asked to key in your pincode.
From the factory, the pincode is set to 0000.
In order to use the Access Control function, you
must enable the pincode. You can then select
the country and maturity rating, you wish to
apply or select the specifi c programs that
should be locked.
The pincode system of the Digital Satellite
Module is not the same as the pincode system
for your television, but it may be easier for
you, if you choose to use the same pincode for
both systems.
Contents of the Access Control menu…
Country… Select which country the Maturity
Rating system of which you wish to use.
Maturity Rating… Select a maturity rating for the
TV programs, this means that programs
exceeding the maturity rating chosen by you
can only be watched when the pincode is
entered.
TV Programs… Restrict access to chosen TV
programs which can then only be accessed
when the pincode is entered.
Radio Programs… Restrict access to chosen radio
programs which can then only be accessed
when the pincode is entered.
Pincode Setup… Enable pincode protection and
change your pincode.
Should you forget your pincode…
If you forget your pincode, enter the Access
Control menu and key in ‘9999’ three times. The
pincode is then reset to the factory code ‘0000’
and you can change to a new personal pincode.
Note: The pincode system described here is not
the same as the pincode you may receive with
your Smart Card. For information about Smart
Card pincode, consult information from your
program provider.
Contents of the CA Module menu…
CA Module… Use this menu to access the inserted
CA Module. The contents of the menu depends
on your program provider.
About the Access Control and CA Module menus…
11
NOTE! The maturity rating system of your country
will often be described in the brochures, you
receive from your program provider.