Belkin F5D5630AU - Manual (Page 22)

40
Manually Configuring your Modem-Router Manually Configuring your Modem-Router
41
se
ct
io
n
2
1
3
4
5
6
7
RIP Defect Enabled If the Modem-Router does not reply to
an IPX RIP request packet, it will stay
in the input queue and not be released.
Accumulated packets could cause
the input queue to fill, causing severe
problems for all protocols. Enabling
this feature prevents the packets
accumulating.
Your E-mail
Address Enter your email address.
SMTP Server
Address Enter your SMTP server address
(usually the part of the email address
following the “@” sign).
POP3 Server
Address Enter your POP3 server address
(usually the part of the email address
following the “@” sign).
User Name Enter your email account user name.
Password Enter your email account password.
Fragmentation
half-open wait 10 secs Configures the number of seconds that
a packet state structure remains active.
When the timeout value expires, the
Modem-Router drops the unassembled
packet, freeing that structure for use
by another packet.
TCP SYN wait 30 secs Defines how long the software will
wait for a TCP session to reach an
established state before dropping the
session.
TCP FIN wait 5 secs Specifies how long a TCP session will
be managed after the firewall detects a
FIN-exchange.
TCP connection
idle timeout 3600 secs (1 hour) The length of
time for which a TCP session will be
managed if there is no activity.
UDP session
idle timeout 30 secs The length of time for which a UDP
session will be managed if there is no
activity.
H.323 data
channel idle
timeout 180 secs The length of time for which an H.323
session will be managed if there is no
activity.
Total
incomplete
TCP/UDP
sessions HIGH 300
sessions Defines the rate of new un-established
sessions that will cause the software to
start deleting half-open sessions.
Total
incomplete
TCP/UDP
sessions LOW 250
sessions Defines the rate of new un-established
sessions that will cause the software to
stop deleting half-open sessions.
Incomplete
TCP/UDP
sessions (per
min.) HIGH 250
sessions Maximum number of allowed
incomplete TCP/UDP sessions per
minute.
Incomplete
TCP/UDP
sessions (per
min.) LOW 200
sessions Minimum number of allowed
incomplete TCP/UDP sessions per
minute.
Maximum
incomplete
TCP/UDP
sessions
number from
same host 10 Maximum half-open fragmentation
packet number from same host
Incomplete
TCP/UDP
sessions detect
sensitive time
period 300 secs Length of time before an incomplete
TCP/UDP session is detected as
incomplete
Maximum
half-open
fragmentation
packet number
from same host 30 Maximum number of half-open
fragmentation packets from the same
host.