Bang & Olufsen BeoCenter 1 - User Guide - Manual (Page 9)

9
Adjust speaker balance and choose
speaker combination
When you connect loudspeakers to your
BeoCenter 1, you can adjust speaker balance
and choose a speaker combination at any
time.
Press repeatedly until SPEAKER
is shown in the Beo4 display
Press to adjust the balance
between the left and right
speakers
Press to select a speaker
combination
Press to exit the SPEAKER
function
LIST
SPEAKER
ss tt
1 – 3
EXIT
Speaker combinations
SPEAKER 1
Sound in the television speakers only. For
programmes with dialogue, e.g. TV news.
SPEAKER 2
Stereo sound in the two external front speakers.
The BeoLab 2 subwoofer is active. For music
CDs.
SPEAKER 3
The television speakers, external front speakers
and the BeoLab 2 subwoofer are active. For TV
programmes in stereo.
Refer to the chapter Adjust sound settings in the
separate Reference book for further information
on presetting a speaker combination.
NOTE! Refer to the chapter Socket panel on the
rear in the separate Reference book for more
information about how to connect speakers to
BeoCenter 1 and to the Guide supplied with the
surround sound module for information on
surround sound.