Bang & Olufsen BeoCenter 1 - User Guide - Manual (Page 6)

6
You can find a TV program which is
tuned into your BeoCenter 1 in four
ways…
– By stepping through all tuned
programs;
– By using the number keys to key
in the number of the program you
want;
– By calling up a program list of all
the tuned programs;
– By selecting a program Group.
Refer to the chapter Use program
Groups for more information.
While watching television you can
also adjust picture format and turn
the BeoCenter 1 to the left or right.
NOTE! Refer to the separate Reference book for
information about how to tune in TV programs.
STB programs are only available if BeoCenter 1 is
equipped with a built-in Set-top Box Controller
and a set-top box is connected.
Watch television
Step through tuned programs
To start watching television, press TV on the
Beo4 remote control. The television
automatically switches on to the last program
you watched.
See list of all programs
Choose a source, for example TV, and press
and hold GO on the Beo4 remote control to
call up a complete list of the available TV
programs. You can also call up a program list
for Groups of programs.
Press to switch on the television
Press and hold to call up the TV
program list
Step up or down through the
available programs
Press to call up the chosen
program, or…
key in the number of the
program you want to see
Call up the program list for a specific Group…
Press to switch on the television
Press ss or tt repeatedly to step
through your Groups
Press to call up the chosen
Group
Press and hold to call up the
program list for this Group
Press ss or tt to see the program
lists for all the other Groups
TV
BBC
GO
▲
▼
GO
0 – 9
TV
BBC
ss tt
MY GROUP
GO
GO
ss tt
Press to switch on BeoCenter 1
Press ▲ or ▼ to step up or down
through the available TV
programs
Key in the number of the TV
program you want
Press another source button, e.g.
SAT, to switch to set-top box
programs
Pressing 0 will swap between the current and
previous TV programs.
TV
▲
▼
0 – 9
SAT