beautypg.com

First-time setup of your television, Overview of first-time setup – Bang & Olufsen Adaptive Sound Technology - User Guide User Manual

Page 2

background image

Your system is equipped with

Adaptive Sound Technology which

allows you to enjoy an optimal sound

experience with a multiple speaker

setup even though your speakers are
not placed correctly for your listening
position. The Adaptive Sound

Technology feature in the television

uses all connected speakers to create

the ultimate sound experience of

perfectly placed speakers.

To enjoy the advantages of this setup

several speakers and a Beo5 remote

control are necessary. If you have
only a few speakers or a Beo4
remote control, this setup is not
recommended and you should
choose the setup without Adaptive

Sound Technology described in the

chapters about first-time setup and
loudspeaker setup in the Guide
enclosed with your product.

The setup procedure is activated

when the television is connected to
the mains and switched on for the
first time. You are led through an
automatic series of on-screen menus
in which you must register the extra

equipment you have connected, such

as a projector and loud speakers.

If you change your setup at a later date,

you can access the same menus and
update your settings. Remember that
you need to set the speaker types
and the distances in the SPEAKER

SETUP menu.

First-time setup of your television

The first-time setup of your television has up

to four main steps: registration of all
connected equipment, tuning of channels,
loudspeaker setup and sound adjustment.*

After the first couple of menus you are asked

to switch Adaptive Sound Technology on or
off. Continue with the procedure described
here if you select ON. If you select OFF, follow
the procedure described in the chapter about

first-time setup in the Guide.

You can make and name your own presets for

listening positions such as at the dining table
or in your favourite armchair. For further
information about listening presets, refer to
page 6 in this supplement.

If you choose to switch on Adaptive Sound

Technology function, you can still disable it in

one or more of the listening presets you
make. For further information about

Adaptive Sound Technology, refer to page 4

in this supplement.

Overview of first-time setup

AST ON/OFF

store

AST

ON

*NOTE! Tuning of channels is not part of first-time

setup in all countries.