Balboa Water Group MLM990S Quick Reference - Manual (Page 2)

900854
YXcYfX$`ejkild\ekj%Zfd
pn 40711-80_A March 16, 2007
Spa Button Menus Turn Accessories On or Off
From the Home display screen, highlight “Spa”, then Enter
(
). The “Spa Functions” menu allows you to control the
following devices installed on your system: Jet Control,
Mister, Lighting, Options, and Blower.
Select and highlight a device, then press to move within
the Spa Functions/device menu with the arrow keys.
Press
to turn the accessory On/Off, or High/Med/Low.
Left Arrow ( ) to exit. (Note: Devices must be set up for the
Spa buttons to function. See User Guide for set up.)
About Heat Mode
From the Home display: “Set”,
, choose “Mode”, .
You can choose from Standard, Economy, or Sleep modes
when using the heater. Select the mode, then
.
Standard mode maintains the desired temperature.
Economy mode heats the spa to set temperature only
during filter cycles.
Sleep mode heats the spa to within 20°F (11°C) of the set
temperature only during filter cycles.
Arrow Left
to return to “Spa Settings”.
Set Menu Presets Your Equipment
Within the “Set” menu (located on the “Home” screen), you
can program your system, view diagnostic and software
information. Move within each menu with the arrow keys.
Follow the on screen instructions.
to activate any menu
or device. to Exit. Options depend on devices installed.
To Program (starting from the “Home” screen).
Filter Cycles. “Home” > Set > > Filter Cycle > .
Fast Keys. “Home” > Set > > Fast Keys > .
Mode, Change Heat. “Home” > Set > > Mode > .
User Settings. “Home” > Set > > User Settings > .
Panel Settings. “Home” > Set > > Panel Settings > .
Diagnostics. “Home” > Set > > Diagnostics > .
Version(s) Info. “Home” > Set > > Versions > .
Refer to User Manual for
additional information