Balboa Water Group Mach 2.1 EL-Series - Manual (Page 3)

Doc P/N 40232 Rev. B
EL Series Mach 2.1 Edit Menu
The Mach 2 EL systems (2.1 and higher) have a new user interface called the Edit Menu. This
menu contains several submenus to allow changing various settings from a panel.
Note: in the following discussion, the ‘Temp’ button can be Warm, Cool, or Temp, depending
on the type of panel used. Likewise, the ‘Light’ button can be any Spa-Light or Fiber-Optic
Light button.
Accessing the Edit Menu
The Edit Menu is accessed using button sequence Temp, Jets1, Light.
After pressing Jets 1, the panel will display ‘
Edt
’, or “
F‘x’
” on the display (‘
x
’ represents filter
duration in hours and will show as 1, 2, 3, etc.). After pressing “Light,” you will see a display of
the the first submenu in the list.
Submenus
Depending on the system configuration, the following submenus are available on the Edit Menu:
USr – User preference settings
SId – Displays system SSID and firmware version number
Navigating the Menus
The following panel buttons are used to navigate through the various submenus and settings:
Temp – cycles through submenus and settings
Jets1 – performs select and enter functions
Light – exits to next higher menu level
For example, once the Edit Menu is entered, pressing the temp button cycles through the
submenus, pressing the Jets1 button enters the selected submenu, and the Light button exits the
Edit Menu.
The SId submenu, and certain settings under the other submenus, behave differently when Jets1
is pressed. This differences will be noted in the appropriate submenu’s description later in this
document.
The main Edit Menu has a five second timeout – if no panel button is pressed within five
seconds the menu will be exited. The submenus have a 30-second timeout.