Autocue K8055 - Manual (Page 5)

 Autocue Group Ltd 2006
figure 3
To configure the Box in the v1.5 QSeries Prompter
Go to the tools menu option and select Options. Expand the Prompt Engine option and
highlight Settings. Click on the KDriver Interface tab;
If you are using a box with a Serial connection to the PC You’ll need to select ‘Stack DAQ
Serial Box’ and change the COM port that the box is connected to.
If the box is connected to the Prompter PC via a USB Cable then select ‘K8055 USB Box‘.
The ‘Offset’ and ‘Multiplier boxes are used to alter the scroll tables for the box, The defaults
for these fields are Offset: 64 and Multiplier: 8
Multiplier – Each scroll rate (from 0-255) will be multiplied by this figure to gain allow for faster
scroll rates.
Offset – Each Scroll rate will have this offset added to it meaning the scroll table will be an
exponential curve.
Please do not change these fields unless instructed to do so, in the first instance please try to
configure the scroll table for the scroll controls (via the ‘Scroll Controls’ Option in the
Configuration Dialog)