Autocue K8055 - Manual (Page 2)

 Autocue Group Ltd 2006
Serial
Items needed to use KDriver Serial Multi-user Interface device:
1 KDriver Serial to IMT Converter Box (Stack DAQ (Serial))
1 Power Supply +15 - +30 VDC
2 Straight Through Serial Cables. (Male 9 Way D to Female 9 Way D)
Note: This box cannot be used in conjunction with Hybrid Multibutton, IMT Foot or IMT 2
button controllers.
Connecting the serial box to the PC
figure 1
To connect a Stack DAQ (Serial) box to a Prompter PC
Connect the first straight through cable from the Female 9 way D on the K8055 box
to a COM Port (Male 9 way D) on the Prompter PC, taking note of which COM port
you have chosen.
Connect the second straight through cable from the Male 9 way D on the Stack DAQ
box to the external port on the IMT card (Female 9 way D), The IMT card may be
inside the Prompter PC or in a Rack mounted box.
Plug the supplied power adaptor into the Stack DAQ box. You should see the green
LED on the left hand side of the box light up and the red LED on the right hand side
flash once.