Antelope Audio Trinity Master Clock - Manual (Page 10)

REAR PANEL
18. AC Power Socket
19. DC Power Connection
20. Word Clock Inputs 1 & 2
21. AES/EBU Input
22. S/PDIF Input
23. Video Input
24. Atomic Input
25. Audio Channel A - Word Clock Outputs 1 to 6
26. Audio Channel A - AES/EBU Outputs 1 & 2 (male)
27. Audio Channel A - S/PDIF Outputs 1 & 2
28. Audio Channel A 256x Word Clock Outputs 1 & 2
The IES AC Connection supports an input range of -2 0VAC. This enables the
device to automatically accommodate mains voltages in any country.
Speakon NL4FX socket for 12VDC Watt power supply.
BNC connections used to accept word clock reference.
The AES/EBU input is a female XLR connection that accepts AES/EBU clock or
audio.
The S/PDIF input is an RCA connection that accepts S/PDIF clock or audio.
The video input is a BNC connection that accepts video reference. See appendix
B
for supported formats.
The BNC Atomic Input connection allows Trinity to receive a 10MHz reference from
an atomic clock device, such as the Antelope 10M. When locked to Atomic, the
internal oven on Trinity is automatically bypassed, the front panel ATOMIC LED
lights, and the atomic device becomes the primary timing reference. This effectively
provides 8 day sample accuracy, which means even more detailed sound and
greater stability.
The sample rate on these outputs always matches the sample rate indicated by the
frequency display for channel A on the front panel.
These two outputs provide AES/EBU clock at the sample rate shown on the front
panel frequency display for Channel A.
These two outputs provide S/PDIF clock at the sample rate shown on the front
panel frequency display for Channel A.
These two outputs provide 256x Word Clock, a protocol used in some older
Digidesign components.
90 5
15
on page 11
Note: User functionality of Trinity is unaffected by the presence of an Atomic device.
9