Brinkmann 810-8750-S - Manual (Page 13)

12
810-8750-S & 810-8752-S SIDE BURNERS
CAUTION: Only use specified natural
gas orifice for your grill.
Step 8
Remove the left side shelf by unscrewing
the four bolts.
Step 9
Remove the side burner brass cap by
using the small wrench to unscrew the two
small screws.
Step 10
Remove access panel on left side of grill
for better view of gas orifice.
Step 11
Use the gas orifice tool to remove LP
brass orifice from the hole on the top of
side burner.
Step 12
Using gas orifice tool, install 1.35mm
(RED) natural gas orifice. Be careful not
to cross thread natural gas orifice.
Step 13
Replace the side burner brass cap to
the burner.
Small Wrench
Brass Cap
Access Panel
Gas Orifice Tool
1.35mm
Existing Side Burner LP
Gas Orifice
Replacement Side Burner
Natural Gas Orifice
(identified by number)
Side Burner 1.35mm (RED)