beautypg.com

Conversion instructions – Brinkmann 810-8750-S User Manual

Page 10

background image

9

CAUTION: Some parts may
contain sharp edges. Wear
protective gloves if necessary.

WARNING: Only use the specific
orifice designated for your grill
model. Always double check the
millimeter size on the side of the
orifice tip prior to installation. Use of
any other orifice could lead to
personal injury, property damage
and void your grill warranty.

Note:

Make sure all control
knobs are in the off
position, LP tank valve is
closed and tank is
disconnected from
regulator and removed
from grill.

Step 1

Pull right accessory drawer out and

remove. Set drawer aside until you
are ready to re-insert drawer at the
end of Step 2.

Step 2

Hold the gas manifold connection with

an adjustable wrench and use a 3/4”
wrench to undo hose connection from
gas manifold. Attach 10’ hose to gas
manifold. Tighten connection carefully
using two wrenches.

Step 3

Open covers and remove cooking

grills and heat shields. Set aside for
later use.

CONVERSION
INSTRUCTIONS

810-8750-S & 810-8752-S

Right
Accessory
Drawer

Gas Manifold
Connection

Cooking Grills

Heat Shields

10’ Natural Gas Hose