Configuring gslb protocol parameters, Changing the protocol port number – Brocade Communications Systems ServerIron ADX 12.4.00 User Manual
Page 41
ServerIron ADX Global Server Load Balancing Guide
29
53-1002437-01
Configuring GSLB protocol parameters
1
The display shows that the public IP address, 207.95.55.23, is used by both the local and peer
GSLB ServerIron ADXs.
Syntax: show server virtual-name-or-ip
NOTE
For a complete description of the fields shown in this screen display, refer to the ServerIron ADX.
To display the IP address used for a VIP at a given GSLB site, enter the following command.
ServerIronADX-B# sh gslb site
SITE: local
ServerIronADX:
192.168.10.7:
state: SELF
Protocol Version: 2
distributed health-chk
Current num. Session CPU load Preference Location Connection
sessions util(%) (%) (0-255) Load-Avg
12 0 4 128 N-AM --
Virtual IPs:
207.95.55.23(A)
The example shows that the public IP address, 207.95.55.23, is used for the VIP at the site "local"
on the ServerIron ADX.
Syntax: show gslb site
NOTE
For a complete description of the fields shown in this screen display, refer to the ServerIron ADX.
Configuring GSLB protocol parameters
This section describes how to modify the following GSLB protocol parameters:
•
GSLB protocol port number: refer to
“Changing the protocol port number”
•
GSLB protocol update period: refer to
“Changing the GSLB protocol update period”
•
DNS response parameters: refer to
“Modifying GSLB parameters related to DNS responses”
•
GSLB policy parameters: refer to
“Changing the GSLB policy metrics”
Changing the protocol port number
By default, a GSLB ServerIron ADX uses TCP port 182 to exchange GSLB information with other
ServerIron ADXs, including the site ServerIron ADXs.
For example, if other devices in the network also use port 182, but for other applications, you need
to change the protocol on those devices or on the ServerIron ADXs.
To change the GSLB protocol port, enter the following command.
ServerIronADX(config)#gslb communication 1882
Syntax: [no] gslb communication