Brocade Communications Systems ServerIron ADX 12.4.00 User Manual
Page 197
ServerIron ADX Global Server Load Balancing Guide
185
53-1002437-01
Displaying GSLB information
1
ServerIronADX# show gslb cache all affinity
prefix length = 24, prefix = 28.1.1.0, region = N-AM
prefix source = affinity,
affinity = site: local, ServerIronADX: 1.1.1.102
Syntax: show gslb cache all affinity
To display the statically generated geographic cache entries on the GSLB ServerIron ADX, enter the
following command.
ServerIronADX# show gslb cache all geographic static
prefix length = 8, prefix = 3.0.0.0, region = N-AM
prefix source = geographic (static),
prefix length = 8, prefix = 4.0.0.0, region = N-AM
prefix source = geographic (static),
...
Syntax: show gslb cache all geographic static
To display the user-configured geographic cache entries on the GSLB ServerIron ADX, enter the
following command.
ServerIronADX# show gslb cache all geographic user-configured
prefix length = 20, prefix = 1.1.0.0, region = ASIA
prefix source = geographic (user-configured), rtt-update,
site = local, ServerIronADX = (1.1.1.102), rtt = 7 (x100 usec)
prefix length = 24, prefix = 10.10.10.0, region = ASIA
prefix source = geographic (user-configured),
Syntax: show gslb cache all geographic user-configured
To display cache entries that contain RTT information reported by a specified Site ServerIron ADX,
enter a command such as the following:
ServerIronADX# show gslb cache all 1.1.1.102
prefix = 1.1.0.0, prefix length = 20
site = local, ServerIronADX = (1.1.1.102), rtt = 7 (x100 usec)
Syntax: show gslb cache all
The
To display the cache entries for a specified prefix longer than a specified length, enter a command
such as the following:
ServerIronADX# show gslb cache 2.1.1.1 longer-than 8
prefix length = 24, prefix = 2.1.1.0, region = N-AM
prefix source = static,
Syntax: show gslb cache
The example above displays all prefix cache entries for address 2.1.1.1, with a prefix length from 8
to 31. You can specify a
To display the cache entries for a specified prefix shorter than a specified length, enter a command
such as the following: