Bosch Single Door - Manual (Page 33)

33
q Mark this amount X on the rear of the furniture door.
q Determine and mark the centerline of the furniture
door.
q Loosen the 2 nuts and remove the adjusting rail.
q Put on the adjusting rail and align along the marks.
Mark the drill holes.
q Drill the holes.
q Screw on the adjusting rail tightly.
i Note
- Attach the adjusting rail to the furniture door with at
least 6 screws. One screw should be inserted under
each double threaded bolt.
*
Wine unit
- The adjusting rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best loadĆbearing material
of the furniture door.
21. Attaching and aligning
the furniture door
i The double threaded bolts are responsible for
adjusting the height of the furniture front.
q Hang the furniture door on the double threaded
bolt.
q Align the furniture door with the double threaded
bolts (Torx screwdriver).
q Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.