BT 500 Twin - Manual (Page 35)

Press and hold the PAGE
button on the base until you
hear a beep.
The following procedure
should be followed on the
handset you wish to register.
Press the QUICKDIAL button.
Press the ✱ button and then
the # button.
Enter the number of the
KEYPAD
desired base unit. If you
have one base unit the
number will be
1 . If you
have two, the second will be
number
2 and so on.
PIN
Enter the base station PIN
(original setting: 0000).
Press the QUICKDIAL button
and wait for the confirmation
beep. The handset number
is automatically defined
by the base
To register a handset
You can use one handset to
de-register another handset
from a base station.
Press the QUICKDIAL button.
Press the ✱ button, then the
9 button.
Enter the handset number
KEYPAD
to de-register.
To de-register a handset
To make an internal call
Press the INTERCOM button.
Enter the handset number
KEYPAD
you want. The called
handset will ring.
Press the INTERCOM button
to end the call.
Quickdial
Quickdial
Quickdial
Quickdial
Intercom
2
2
WXY
Z 9
Page
You can check your handset
number to a registered base
by:
Press the QUICKDIAL button.
Press the ✱ button.
KEYPAD
Then press 7 and 1 .
Press the QUICKDIAL button.
The number of short beeps
heard corresponds to the
handset number.
To check your handset number
Quickdial
18
PIN
Enter the base station PIN.
Press the QUICKDIAL
button. You will hear a
confirmation tone