BT 500 Twin - Manual (Page 21)

Press and hold the PAGE
button on the base until you
hear a double beep.
The following procedure
should be followed on the
handset you wish to register.
Press the QUICKDIAL button.
Press the ✱ button and then
the # button.
Enter the number of the
KEYPAD
desired base unit. If you
have one base unit the
number will be
1 . If you
have two, the second will be
number
2 and so on.
PIN
Enter the base station PIN
(original setting: 0000).
Press the QUICKDIAL button
and wait for the confirmation
beep. The handset number
is automatically defined
by the base. (See page 20
for more details of “Operating
with additional base stations”
.)
To register a handset
You have to use a different
handset to de-register
another handset from a base
station, i.e. if you want to
de-register handset 2 you
can use handset 1.
Press the QUICKDIAL button.
Press the ✱ button, then the
9 button.
Enter the handset number
KEYPAD
to de-register.
PIN
Enter the base station PIN.
Press the QUICKDIAL
button. You will hear a
confirmation tone
To de-register a handset
Quickdial
Quickdial
Quickdial
Quickdial
2
2
WXY
Z 9
Page
You can check your handset
number to a registered base
by:
Press the QUICKDIAL button.
Press the ✱ button.
KEYPAD
Then press 7 and 1 .
Press the QUICKDIAL button.
The number of short beeps
heard corresponds to the
handset number.
To check your handset number
Quickdial
18