BT 500 Twin - Manual (Page 19)

Base station settings
You can use your handset
to change the melody on the
base. You can choose from
5 melodies. The pre-set
melody is 3 .
Press the QUICKDIAL
button.
Press the ✱ button, then the
5 button.
Choose between the
KEYPAD
different melodies 1-5
(the melodies can be heard
during selection).
Press the QUICKDIAL
button. You will hear a
confirmation tone.
You can use your handset
to change the volume on the
base unit. The volume
levels range from
0-3 , where
0 is off and 3 is maximum.
The pre-set level is 3 .
Press the QUICKDIAL
button.
Press the ✱ button, then the
6 button.
Choose a setting from 1-3
(the volume level can be
heard during selection).
Press the QUICKDIAL
button to confirm.
To adjust the base ringer melody
To adjust the base ringer volume
If you change your base
station PIN, keep a record
of the new number by
writing it in the space
provided on page 7.
Press the QUICKDIAL
button.
Press the ✱ button, then the
0 button.
Enter the current 4-digit
PIN
base station PIN (original
setting 0000).
Press the QUICKDIAL
button. Enter the new 4-digit
PIN
PIN you want.
Press the QUICKDIAL
button.
PIN
Re-enter the new PIN.
Press the QUICKDIAL
button. You will hear a
confirmation tone.
To change the base station PIN
Quickdial
Quickdial
JKL
5
Quickdial
Quickdial
Quickdial
Quickdial
0
16
Quickdial