Belkin DESKTOP CARD F5D7001 - Manual (Page 23)

21
Using the Belkin Wireless Setup Utility
21
1
2
3
4
5
6
se
ct
io
n
1.
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)”.
2.
Enter your network key. This can be from eight to 63 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients (network cards) that you want to include
in your wireless network.
3.
Click “Apply Changes” to finish. You must now set all clients
(network cards) to match these settings.
WPA (with server) Settings
Choose this setting if your network uses a radius server to distribute keys
to the clients (network cards). This is typically used in business networks.
1.
From the “Security Mode” drop-down menu, select “WPA (with
Radius Server)”.
2.
Enter the IP address of the radius server into the “Radius
Server” fields.
3.
Enter the radius key into the “Radius Key” field.
4.
Enter the key interval. The key interval is how often the keys are
distributed (in packets).