Buffalo Technology WLI-USB-L11G - Manual (Page 30)

B.5 Installation of the TCP/IP
Installation for TCP/IP on Windows ME/9X:
1. Re-boot the PC
2. Select Start-Setting-Control Panel
3. Double click the Network icon
4. Click the Add
5. Selecting Protocol and click Add
6. Select Microsoft for manufacture and TCP/IP in the Network Protocol and click OK
If the TCP/IP cannot be added this way, the user must refer to the PC manufacture
7. Click Yes when the PC asks for re-start
Installation for TCP/IP on Windows 2000:
1. Re-boot the PC and logon as Administrator
2. Select Start-Setting-Network and dialup connection
3. Double click the Local Area Connection icon
4. Click Property
5. Click Install
6. Select Protocol and click Add
7. Select Internet Protocol TCP/IP and click OK
8. Check if Internet Protocol TCP/IP is added and click Close
24