Braun 6 - Manual (Page 6)

Page 4
Lift Components (continued)
regarding Lift-Tite ™ latches are
provided on pages 15 and 16.
Outboard Roll Stop: The
cylinder-powered automatic
outboard roll stop provides a
ramp for wheelchair loading and
unloading at ground level. Pho-
tos and further details regarding
the outboard roll stop are pro-
vided in the Pre-Lift Operation
Notes section (pages 20 and 21).
Roll Stop Latch: The spring-
loaded latch locks the outboard
roll stop in the vertical position
when the platform raises above
ground level.
Automatic Inboard Roll Stop
and Bridge Plate (IB): L915 “IB”
lift models are equipped with an
automatic mechanical inboard roll
stop that also serves as the
bridge plate (shown in the Lift
Terminology Illustration on page
6). The mechanical roll stop/
bridge plate automatically rotates
from the horizontal (bridging)
position to the vertical (roll stop)
position as the lift lowers and
raises. Further details regarding
the automatic mechanical inboard
roll stop are provided on pages
17 and 18.
Lift Terminology
Fixed Inboard Roll Stop: A
stationary inboard roll stop is built
into “non-IB” L915 lift platforms
(shown in the Lift Terminology
Illustration on page 7).
Independent Hinged Bridge
Plate: “Non-IB” L915 lift models
are equipped with an independent
hinged bridge plate (shown in the
Lift Terminology Illustration on
page 7). The bridge plate bridges
the gap between the lift platform
and the vehicle floor. Further
details regarding the bridge plate
are provided on pages 17 and 18.