Braun 6 - Manual (Page 21)

Page 19
Pre-Lift Operation Notes and Details
Bridge plate at floor level.
WARNING
Discontinue lift use
immediately if any lift
component does not
operate properly.
Failure to do so may
result in serious
bodily injury and/or
property damage.
Independent Hinged
Bridge Plate
Fixed Inboard Roll
Stop “non-IB”
photo below right). The bridge
plate bridges the gap between the
platform and the lift base plate
when the platform is fully raised
(at floor level), providing a surface
for wheelchair travel.
The bridge plate unfolds (rotates)
to the horizontal position (rests on
platform) when the platform
unfolds from stow position to floor
level (UNFOLD switch is
pressed).
The bridge plate folds (rotates) to
the vertical position when the
platform folds (FOLD switch is
pressed).