3D Robotics Video/OSD Kit - Manual (Page 8)

For customer support, contact us at [email protected]
or call our support line at +1 (858) 225-1414
Monday through Friday, from 8 am to 5 pm, PST.
OSD/FPV Kit Manual C | ©3D Robotics, Inc. | 26 June 2014
Support
Camera specifications
» Image device: 1/3” Sony Super HAD Color CCD
» Horizontal resolution: 520 TV line.
» Minimum illumination: 0.1 Lux
» Number of pixels: NTSC: 768(H) x 492(V)
» Scanning system: PAL: 625 lines, 50 field/sec; NTSC: 525 lines, 60 field/sec.
» Sync system: Internal synchronization
» Video output: 1Vp-p 75 Oms , Negative
» White balance: Auto
» S/N ratio: More than 48 dB (AGC off)
» Gamma characteristic: 0.45
» Electronic shutter: PAL : 1/50~1/100,000 sec; NTSC : 1/60~1/100,000 sec, auto
» Lens option: Pinhole lens, board lens, wide angle lens, vari-focal lens available.
» Power consumption: 12V±10%DC, 50mA.
» Operation temperature: -10° ~ + 50°, RH 95% Max.
» Storage temperature: -20° ~ + 60°, RH 95% Max.
» Dimension: 20x20 mm
» Weight: 1.1 oz
OSD specifications
» ATmega328P with Arduino bootloader
» MAX7456 monochrome on-screen display
» FTDI cable compatible pinout
» Standard 6-pin ISP header
» Two independent power sections with an LED indicator on each
» Solder jumpers for combining the power sections
» +5V 500 mA regulator for up to +12V supply input
» Solder jumper for PAL video option
» Exposed test points for HSYNC and LOS
» Dimensions: 0.7”W x 1.7”L (2.4” w/ pins as shown) x 0.3”H