Fig8, Fig7, Fig 9 – Zero Gravity Suzuki GSX650F (2008-2010) & GSX1250FA (2011-Present) Windscreen User Manual

Page 3: Fig 9a

SPORTBIKE SADDLES & WINDSCREENS

WWW.ZEROGRAVITY-RACING.COM

180 install

Rev A

FIG8

Fig 7.

Remove instrument panel by pulling it apart from the fairing frame. The wire harness needs to be discon-

nected before fully removing.

USE CAUTION TO NOT OVER PULL!!!

FIG7

Disconnect

wire harness

Pull Apart

Start from the

tail ends

Remove allen

fastener

FIG 9

Bottom Wellnuts

Remove

wellnut

FIG 9A

Wellnut

Fig 9.

Remove 2 allen fastener at the bottom wind-

screen, viewing from the inside fairing.
(For Both Sides)

See FIG9.

Fig 9A.

After removing both allen fastener, remove

the wellnut for easier screen removal.
(For Both Sides)

See FIG9A.

Work your way

to the center.

Fig 8.

Now you are ready to separate the inner fair-

ing from the bike. Start from the two tail ends and
start dislodging and working your way to the inside.

Suzuki 2011 GSX1250FA & 2008-2010 GSX650F

DIY Windscreen Install