Zero Gravity Honda VFR 800 (2002 and up) Windscreen User Manual
Page 2
Honda VFR 800 2002 - 2010 DIY Windscreen Install
2
454 install
Rev. A
WWW.ZEROGRAVITY-RACING.COM
Please see www.zerogravity-racing.com for
further information concerning this product.
FIG4
FIG5
Fig 6.
Viewing from the back of the fairing, both fair-
ing stay standoffs should be in alignment with the Zero
Gravity windscreen fairing stay standoff openings.
See
Fig 7
for closeup.
FIG6
Fig 7.
Fairing stay standoff in correct location. Hand
tighten all fasteners then reinstall mirrors.
FIG7
Slide
down
Fig 5.
Now you are ready to lock the screen into the
fairing.
Apply light pressure
from the top to slide
the windscreen down. The slide is no more than 1/4”.
Fig 4.
Viewing from the back of the fairing, locate the
fairing stay standoff above the mirror mounting holes.
It should look like this on both sides of the windscreen.
Fairing
stay
standoff
Side Mirror
mounting holes
Note: Revert back to steps Fig 3 ~ Fig 6 if alignment isn’t achieved.
Slightly off positioned
standoff hole
Correctly positioned
standoff hole