Installation/assembly, Removing the evaporation flask and steam duct – Yamato Scientific RE540 Evaporators, Rotary User Manual
Page 16
13
Installation/Assembly
Removing the Evaporation Flask and Steam Duct
10. Evaporation flask
Remover the flask clamp while holding the evaporation flask, and remove the evaporation flask
from the steam duct.
If the evaporation flask does not easily come off, use the blue flask remover.
●
●
●
●
For easy evaporation flask removal…
Turn the flask remover to touch the end of flask. Rotate further left and you can push out the
flask easily without force.
*
*
*
*If you tap the flask to remove, the glass apparatus may break.
11. Steam duct
When you loosen the steam duct holder, the joint comes off easily.
* Loosen the steam duct holder, but do not take it off when you remove the steam duct.
If you remove the holder, the rings will come off.
●In case the rings should come off, and you do not know how to assemble them, see the chart
for re-assembly( P8 ).
Flask Remover
Flask Clamp