Yamato Scientific IQ820 Low Temperature Incubators - Manual (Page 9)

6
Before Using this unit
Requirements for Installation
6. Do not modify 7. Installation on horizontal surface
•
Modification of this unit is strictly
prohibited. This could cause a failure.
•
Set this unit to the flattest place. Setting
this unit on rough or slope place could
cause the vibration or noise, or cause the
unexpectible trouble or malfunction.
改造
8. Do not make an overload 9. Do not set samples in close formation
•
The withstand load of shelf is 15kg
（uniform load）Set the samples apart
each other.
•
The temperature in furnace cannot be
controlled if too much samples are set
there. Make sure to use the shelf and
set samples apart each other so as to
make the free space of 30% or more to
the furnace to acquire accuracy of
temperature.
M ake the free space of 30% or more
Modification
Samples
Shelf
15Kg