Connecting to video or s-video devices, Connecting to display devices – BenQ PB8260 User Manual

Page 22

Text mode
Original mode

Connection

Connecting to video or S-Video devices

S-Video devices

Video devices or VCR

If the selected video image is not displayed after the projector is turned on and the correct
video source has been selected, check that the video source is turned on and operating
correctly. Also check that the signal cables have been connected correctly.

Connecting to display devices

If you want to monitor your presentation close-up on a monitor as well as on the screen, you
can connect the RGB signal output port on the projector to an external monitor with a VGA
cable or D-Sub - DVI cable.

•

576i

•

576p

•

720p (50/ 60 Hz)

•

1080i (50/ 60 Hz)

S-Video cable

RCA Audio/Video Cable

VGA cable or D-Sub - DVI
cable