Yamato Scientific BM410 Water Baths - Manual (Page 3)

1
1. Specifications
Model BM410
Temp. range during operation Room temp. +5 ℃ ∼ 95℃ *1
Temp. setting range 0 ℃∼100℃
Accuracy of temp. adjustment *2 ±1℃ at 60℃
Control system PID Control by Micro Computer
Setting system Digital Setting By △▽Key
Display system Digital display shows the measured/set temp.
Resolution to display/set 1 ℃
Operation function Operation at fixed point
Extra function Temp. presetting function (preset/select one temp.)
Sensor Pt100 Ω
Material SUS316 pipe heater
Heater
Capacity 1kW
Power switch Also functions as a circuit protector
Other components Drain (with plug)
Safety device
1. Self-diagnostic Functions
Automatic Overheat Prevention, Sensor Trouble,
TRIAC short, Heater disconnection, Main relay trouble
2. Circuit protector
3. Tank protection cover
4. Temp. fuse
Capacity 7000ml
Tank Dimension φ9.8×Depth 5.9 (inches)
φ25×Depth 15 (cm)
External dimensions (W ×D×H) *3 12.2 Ч14.2Ч9.1 (inches)
31 Ч36Ч23 (cm)
Weight 15.4 lb. (7kg)
Power source required AC230V ±10％ 50Hz 4.5A
Liquid used Water
Standard accessories
● Operation manual 1
● Warranty 1
*1 In case of unloaded operation of bath only. The maximum temperature varies on circumstances
and operational conditions.
*2 It shows the performance under rated power supply at the room temperature of 23 ℃±5℃ and with
humidity of 65 ％±20％.
*3 It does not include projection parts.-
.