WORX WU330 710W SDS Hammer Drill 240V - Manual (Page 7)

7
•
•
•
•
•
•
accessories are used.
And the tool is being used as intended by its design and these
instructions.
this tool may cause hand-arm vibration syndrome if its use is not
adequately managed.
warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well
lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration
accessories.
Avoid using tools in temperatures of 100C or less.
Plan your work schedule to spread any high vibration tool use across a
number of days.
Accessories
Auxiliary handle 1
Depth gauge 1
Drill chuck with adpter and chuck key (WU330.1 WU332.1) 1
SDS-plus quick change chuck (WU330.2) 1
SDS-plus quick change keyless chuck (WU330.3) 1
Chuck key(WU330.2 WU332.1) 1
We recommend that you purchase your accessories from the same
store that sold you the tool. Use good quality accessories marked
with a well-known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and offer advice.