WORX WU330 710W SDS Hammer Drill 240V - Manual (Page 11)

11
10
11
For simultaneous drilling and
impacting of concrete or
masonry, choose the Hammer
drilling position.
For drilling into steel, wood and
plastics choose the Rotary
drilling position.
For impacting only - for light
chipping, chiseling and
demolition applications choose
the Hammer position.
WU330 WU330L
WU330.1 WU330.2
WU330.3
WU332
WU332.1
warning: Never change the direction of rotation while the
tool is rotating, wait until it has stopped.
aDJUStaBle DePtH StoP
Fit the drill bit into the chuck. Loosen the depth stop by rotating
the handle anti-clockwise. Slide the depth stop until the distance
between the depth stop end and the drill bit end is equal to the depth
of hole/screw you wish to make. Then clamp the depth stop by
rotating the handle clockwise.
fUNctioN MoDe SelectioN (See fig. f & G)
The operation of the gearbox for each application is set with the
function mode selection switch (4), To change between functions,
depress the unlocking button (15) and rotate the selector to the
desired operating mode.
15
2
1
13 14
A2 A1
D
C2
C1 B
F
E
G
1 7
WU330.2 WU330.3
WU330.3
WU330.2 WU330.3
2
12.1
12.2
15