WORX WU330 710W SDS Hammer Drill 240V - Manual (Page 4)

4
Symbols Additional safety points for your
rotary hammer
Always wear a dust mask.
Safety boots are recommended at all times especially when using the
chisel actions.
Proper safety gloves are also recommended.
The high torque machine should not be used, while standing on a
ladder.
Do not use damaged or worn Chisel bits.
Do not run the machine with any part of the casing missing or
damaged.
Use a detector to localize lines in walls with concealed electric, water
or gas lines. Avoid touching live components or conductors.
Before starting to work, always check that the chisel properly locked
in the chuck.
Chisel bits may be flung out of the machine accidentally and cause
serious injury.
Vibrations can injure the hand-arm system. Keep exposure to
vibrations as short as possible. When carrying out work, always
hold the hammer with both hands and ensure that you have a stable
standing position. 1
2
3
4
5
6
7
8
9
10
To reduce the risk of injury, user must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your Local Authority or retailer for recycling advice.