WORX WU644 300W 1/3 Sheet Finishing Sander 240V - Manual (Page 10)

10
clamp lever (7).
Make sure that the sanding paper faces firmly against the base plate
(8). Fold the sanding paper around and clamp the other end in the
same manner.
Sanding paper without holes, e. g. from rolls or by the meter, can be
punctured with the paper punch (10) for use with dust extraction (See
Fig. b).
DUSt eXtRactioN
Dust extraction prevents large accumulation of dust, high
concentrations of dust in the ambient air and facilitates disposal.
For long periods of working with wood or for commercial use on
materials that produce dust that is detrimental to health, the machine
is to be connected to a suitable external dust extraction device.
USiNg tHe DUSt eXtRactioN aDaPteR (See fig. c)
Your sander is equipped with a dust extraction adapter (12), which is
designed for collecting dust task. Insert the dust adapter (12) into the
rear dust outlet of sander. Then pull the dust adapter and make sure it
is tightened securely on the dust outlet. Then connect the hose of a
vacuum cleaner.
First please turn on the vacuum cleaner, and then turn on the sander.
If you stop sanding, first turn off the sander, then turn off your
vacuum cleaner.
DUSt Bag (See fig D, e)
For small sanding jobs, a paper dust bag can be used.
Always operate your sander with the dust bag fitted. For the best
performance always empty the dust bag in time. open the zip and
1
2
10 12
E
C B
F D