Technical data, Noise and vibration data, Vibration information – WORX WU407 1400W vibrafree Reciprocating Saw 240V User Manual
Page 6

6
Technical data
Type WU404 WU407 WU407l (400-420-designation of
machinery, representative of Reciprocating Saw)
WU404
WU407
WU407l
Voltages
220-240V~50/60Hz 110V~50Hz
Power
1200W
1400W
1200W
No load speed
0-3000/min
0-2500/min
Stroke length
32mm
Max cutting
capacity
Wood (thickness)
300mm
PVC pipe
150mm
Steel (thickness)
13mm
20mm
Protection class
/ll
Machine weight
4.2kg
4.4kg
Noise and vibration data
A weighted sound pressure
L
pA
:84.4dB(A)
K
pA
3dB(A)
A weighted sound power
L
wA
: 95.4dB(A)
K
wA
3dB(A)
Wear ear protection when sound pressure is over
80dB(A)
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Vibration information
Vibration total values (triax vector sum) determined according to
EN 60745:
Cutting into wood
Vibration emission value a
h CW
=5.61m/s
2
Uncertainty K=1.5m/s²
Cutting into steel
metal
Vibration emission value a
h CM
=11.4m/s
2
Uncertainty K=1.5m/s²
Warning: The vibration emission value during actual use of the
power tool can differ from the declared value depending on the ways
in which the tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and
in good condition.
The tightness of the grip on the handles and if any anti vibration
accessories are used.
And the tool is being used as intended by its design and these
instructions.
this tool may cause hand-arm vibration syndrome if its use is
not adequately managed.
Warning: To be accurate, an estimation of exposure level in
the actual conditions of use should also take account of all parts of
the operating cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.