Western Digital My Book Pro Edition II User Manual - Manual (Page 15)

MY BOOK PRO EDITION II
USER MANUAL
MY BOOK RAID MANAGER FOR WINDOWS – 12
Configuring RAID
My Book Pro Edition II is preformatted for HFS+ (Journaled) and is pre-configured for
RAID 0 (Striped) mode for maximum capacity and accelerated performance. This
product also supports RAID 1 (Mirrored) mode for data protection with instantaneous
and automatic data updates.
1. To configure or change the RAID setting, select the device from the menu and
click Next.
2. Select the desired RAID configuration by clicking RAID 0 or RAID 1 (the
following example shows RAID 1). Select Quick NTFS format if you want the
drive formatted automatically following completion of the new RAID setting.
3. Enter the confirmation number provided, then click Yes. When prompted again,
click Yes to confirm.
Important: If you have existing data, make sure to back up all files stored in the
My Book onto another storage device before you proceed.