Western Digital My Net AC Bridge User Manual - Manual (Page 13)

GETTING STARTED
10 MY NET AC WI-FI BRIDGE
USER MANUAL
Connecting to the Router Using the WPS Button
1. Press the router’s WPS button and the Wi-Fi bridge’s WPS button within a period of two
minutes.
The WPS LED blinks while the connection is being established.
When the wireless connection between the router and the bridge is established, the
wireless and Internet LEDs are solid.
The router and bridge are connected wirelessly.
2. Congratulations! You can start using the Wi-Fi bridge in conjunction with the router, or if
you want to configure the bridge’s settings, proceed to “Basic Settings” on page 16.
Connecting to the Router Manually
There are cases requiring you to set up the bridge manually, for example, when:
Wi-Fi Protected Setup (WPS) is disabled.
The router does not support WPS.
Some interference is preventing WPS from working.
SSID broadcast is disabled.
WPA only is enabled.
WEP is enabled.