Western Digital My Net AC Bridge User Manual - Manual (Page 11)

3
GETTING STARTED
8 MY NET AC WI-FI BRIDGE
USER MANUAL
Getting Started
This chapter contains the following topics:
Setting up the Wi-Fi Bridge
Connecting to the Router Using the WPS Button
Connecting to the Router Manually
Setting up the Wi-Fi Bridge
1. Make sure your router supports 5 GHz. It may also be referred to as a dual-band router
or concurrent dual-band router. The 5 GHz band helps ensure the highest speeds and
seamless entertainment traffic.
2. Connect the Wi-Fi bridge to a power source and press the Power button. The power
LED on the front of the bridge blinks during boot-up and becomes solid once the
process is complete.
1