beautypg.com

Windows vista, Installing the driver automatically, Installing the driver manually – Western Digital My Passport Elite User Manual User Manual

Page 64

background image

MY PASSPORT ELITE

USER MANUAL

INSTALLING AN SES DRIVER – 59

Windows Vista

After you physically connect the drive as shown in Figure 2 on page 6, two or three
screens may pop up, depending on your computer setup.

Installing the Driver Automatically

To install the SES driver automatically, you must be connected to the Internet.

Note: If Autoplay is enabled, two extra screens may display at the same time as

the Found New Hardware screen. Close those two screens.

1.

On the Found New Hardware screen, click Yes, search online this time only.

The driver is automatically installed.

Installing the Driver Manually

You might want to install the SES driver manually, for example, if you are not connected
to the Internet.

Note: If Autoplay is enabled, two extra screens may display at the same time as

the Found New Hardware screen. Close those two screens.

1.

On the New Found Hardware - WD SES Device wizard screen, click Locate and
install driver software
.