Western Digital WD Sentinel RX4100 User Manual - Manual (Page 101)

APPENDIX
95 WD SENTINEL RX4100
ADMINISTRATOR AND MAINTENANCE GUIDE
Installing the WD Sentinel Bezel
The removable WD Sentinel bezel protects the units hard drive and power button from
accidental use or removal. Use the following steps to install and remove the front bezel.
What you’ll Need:
 WD Sentinel Bezel
 Bezel keys (2)
Installing the WD Sentinel Bezel
1. Insert the bezel keys into both locks on the front of the bezel, turning the keys
clockwise to unlock the locks (Figure 1).
Figure 1. Bezel locks
2. Place the bezel over the bezel handles on the front of the unit.
3. Turn both keys counter clockwise to lock the bezel.
4. Remove both keys and place them in a safe location.