Upgrade the system firmware, Wd anywhere access settings – Western Digital My Book World Edition II (blue rings) User Manual User Manual
Page 37
MY BOOK WORLD EDITION
USER MANUAL
APPENDIX A - SHARED STORAGE MANAGER – 34
Upgrade the System Firmware
1. Click
Upgrade the System Firmware
.
2. If new firmware is available, click
Click to
download and install
.
3. After approximately 30 minutes, the device will automatically log off and reboot.
When all LEDs on the device are illuminated, close the open browser. Your
updated My Book World Edition is now ready to use.
WD Anywhere Access Settings
1. Click
WD Anywhere Access settings
.
2. Click
Start, Stop,
or
Reset.
MioNet status displays after each selection.
CAUTION: Upgrading the firmware takes approximately 30 minutes and
must not be interrupted in any way. During this time, DO NOT perform any
browser operations or power off the device. Interruption to the firmware
upgrade process will result in complete and irrecoverable data loss and a
damaged My Book World Edition.